<div class='article'><h2 class='title'>Engine guard</h2><p class='text'>The particularly sturdy design of the engine guard also offers the best possible protection of the valuable components offroad thanks to a wall thickness of five millimeters on the underbody and a particularly large protected area. An additional contact point on the frame, an innovation from SW-MOTECH, distributes the forces acting upon ground contact not only onto the mounting points but also to the steel frame of the Africa Twin.</p><div class='arguments'><ul><li>To replace the original engine guard from Honda with a wall thickness of 2.5 millimeters</li><li>Protects underbody and parts of manifold and exhaust against rocks and collision</li><li>Robust due to high-strength aluminium alloy five millimeters thick in the lower area, four millimeters wall thickness on the sides</li><li>The engine guard by SW-MOTECH is distinguished by a particularly long and laterally raised outline and thus has a particularly large protective surface</li><li>In contrast to the much smaller original engine guard this also protects parts of the manifold and the exhaust</li><li>Elements made of 8 mm thick hard rubber additionally absorb impact forces and distribute them onto all contact points</li><li>Two cutouts on the bottom allow access to both oil drain plugs - removal of the engine guard is therefore not necessary in order to drain the engine oil</li><li>Cutouts on the sides provide ventilation, weight reduction and emphasize the look of the bike</li><li>Compatible with original side stand from Honda or the centerstand from SW-MOTECH (see accessories)</li><li>Compatible with all equipment variants of the Honda CRF 1000L Africa Twin (Standard / ABS / DCT), except DCT version with gear lever</li></ul></div><div class='delivery'><h3>Included in delivery</h3><ul><li>1 x Engine guard</li><li>Mounting instructions</li><li>Mounting material</li></ul></div><div class='details'><h3>Details</h3><ul><li><span>Material: </span>Aluminum</li><li><span>Material strength: </span>0,50 cm / 0.20 in</li><li><span>Surface: </span>brushed</li><li><span>Color: </span>silver</li><li><span>Total Weight: </span>appr. 3,5 kg / appr. 7.7 lb</li></ul></div><div class='hint'><h3>Note</h3><ul><li>The engine guard is supplemented by the crash bar and the engine guard extension mounted on the SW-MOTECH centerstand</li></ul></div><div class='hint'><h3>Incompatible with</h3><ul><li>Not compatible with DCT version with gear lever</li></ul></div><!-- T: 04-05-2024 04:52:36--></div>
<div class='article'><h2 class='title'>Extension for brake pedal</h2><p class='text'>SW-MOTECH has manufactured this extension for brake pedal made of milled aluminum. It is suitable for the original Honda Africa Twin CRF1100L brake pedal.</p><p class='text'>SW-MOTECH manufactures these extensions from high-strength milled aluminum alloy; they feature a black anodized surface and a stainless steel step plate. For optimal ergonomic adjustment, the increase in the brake pedal step can be adjusted in two stages of 22 or 27 millimeters.<br /><br />The extension for brake pedal is ideal for off-roading: it enhances the original brake arm tread and guarantees a safe, controlled use of the brake. The extension makes it possible for the contact surface to be both broader and higher. That means the extension for brake pedal offers better safety and better control over the rear brake. <br /><br />When off-roading, you often alternate between seated and standing positions. When standing, the angle of your knee changes, so your foot cannot put as much pressure on the smaller pedal. Thanks to the raised contact surface, your foot is angled more sharply, so it can reach and control the brake arm more easily, even when standing. There are two height settings. <br /><br />In addition to the raised surface, the extension for brake pedal features a widened contact surface. This is equipped with a ridged surface, so it offers improved grip when the arm surface is dirty or wet.</p><div class='arguments'><ul><li>Enhances the original brake pedal</li><li>Raised and wider surface</li><li>Improved grip thanks to ridged surface – even when wet and dirty</li><li>Raised contact surface by 22 or 27 millimeters</li></ul></div><div class='delivery'><h3>Included in delivery</h3><ul><li>1 x Extension for brake pedal</li><li>Mounting instructions</li><li>Mounting material</li></ul></div><div class='details'><h3>Details</h3><ul><li><span>Material: </span>Aluminum / Stainless steel</li><li><span>Surface: </span>anodized</li><li><span>Color: </span>black / silver</li><li><span>Total Weight: </span>appr. 0,1 kg / appr. 0.2 lb</li></ul></div><!-- T: 04-05-2024 04:43:39--></div>
